Facing the F22 Fault Code on a Vaillant Boiler?
If your heating has stopped working and your Vaillant boiler is displaying F22, don't panic. The F22 error code is one of the most common issues on Vaillant models, and in most cases, you can resolve it yourself without calling a plumber.
What Does the Vaillant F22 Error Mean?
The F22 fault code indicates that your boiler has detected low water pressure (typically below 0.5 bar). Boiler systems operate using a pressurized sealed loop. When water pressure drops too low, safety sensors trigger a shutdown to protect the internal heat exchanger from overheating or running dry.
How to Check Your Boiler Pressure
Locate the pressure gauge on the front control panel of your boiler. It might be a physical dial with red and green zones, or a digital reading on the LCD display.
- Ideal Pressure: Between 1.0 and 1.5 bar (when the system is cold).
- Low Pressure (F22 trigger): Below 0.5 bar.
Step-by-Step Guide to Fix the F22 Error
You can fix this error by adding water to the system using the filling loop (a flexible silver metal hose with black plastic valves located directly underneath the boiler).
Repressurizing Your Vaillant Boiler:
Safety Notice: Proceed With Care
While repressurizing is a simple task, if you do not feel comfortable doing it, cannot locate the correct valves, or if your boiler has a keyless filling link system, **do not attempt to force it**. Over-pressurizing the system can trigger pressure relief valve leaks. When in doubt, it is always safest to call a registered Gas Safe engineer.
- Switch off the boiler and wait for it to cool down (about 30–60 mins).
- Locate the filling loop underneath the boiler. It connects the cold water main line to your heating return line.
- Attach the filling loop securely if it is a detachable type. Ensure both end nuts are tight.
- Open the valves slowly. Rotate the black plastic taps 90 degrees. You should hear water starting to flow into the boiler.
- Watch the pressure gauge. Stop turning when the pressure dial reaches exactly 1.5 bar.
- Close both valves fully by turning the taps back to their original position.
- Turn the boiler back on and reset if necessary. The F22 error code should disappear.
Why Did My Boiler Lose Pressure?
Boilers do not naturally lose water. If the F22 error returns frequently, it means water is escaping from the system. The two most common causes are:
- A leak in the system: Inspect your radiators, valves, and exposed pipework for signs of moisture or rust.
- Recent radiator bleeding: Releasing air from your radiators lets out volume, which drops the pressure. You simply need to top it up.
- Failing Pressure Relief Valve (PRV) or Expansion Vessel: If pressure spikes to 3.0 bar when the heating is on, and then drops to 0, the internal expansion vessel may need re-charging or replacement.
When to Call a Professional
If you repressurize the boiler and the pressure drops back down within a few days, or if you cannot find the filling loop, it's time to call in a professional. Do not attempt to open the boiler casing yourself. At Blue Boiler, our Gas Safe certified engineers can diagnose leaks and swap faulty valves quickly.


